Morningstar's SunSaver™ is the world's leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.

• 100% solid state
• Series design (not shunt)
• True 0 to 100% PWM duty cycle
• Setpoint accuracy to 35 mV
• Rated for 25% overloads
• Fully encapsulated in epoxy potting
• Marine rated terminals / anodized case
• Temperature compensation
• Sealed / Flooded battery select
• No need to derate
• Parallel for 40 amps or more
• Green charging / Red LVD indicators

 SunSaver Duo

Morningstar’s SunSaver Duo™ is an advanced PWM two battery controller for RV’s, caravans, boats and cottages. Rated for 25 amps at 12 volts DC, this product will charge two separate and isolated batteries at the same time, such as a "house" and an engine battery, based on user selectable priorities. This controller also includes a backlit remote meter which may be mounted in or on a wall, and displays digital and pictorial status information about the solar power system.

*Independently charges both the house & engine Battery
*Remote meter displays digital & pictorial system information
*25 amps 12Volt
*5 Year Warranty

 

 SunSaver MPPT

Morningstar’s SunSaver MPPT™ solar controller with TrakStar™ Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid PV systems.

* Lower cost
* Includes load control
* Maximizes power harvest
* Provides power boost
* Use of high voltage modules
* Fully adjustable & programmable
* Extensive electronic protections
* Longer battery life
* Data logging
 

TriStar™ is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. It is rated at 45 or 60 amps, both at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.

 


 

* Aluminium black anodized casing
* No heat generated at boost mode
* Reverse battery polarity protection
* Pulse width modulation(PWM)for float charge
* Large terminal for cable connection

Specifications
* Operating voltage 12V
* Rated continuous solar current 20A
* Rated continuous charge current 20A
* Charge control function Float-Boost-Float mode
* Boost max voltage 14.7V
* Float max voltage 13.7V
* Boost cut in voltage 12.7V
* Dimension(mm) 120mm x 50 x 42  L x W x H

 

 PL series

The PL series of charge controllers give you the freedom to operate your solar electric system the way you want to. They offer complete control over the charge cycle, plus an unprecented amount of useful information about current and past performance.

PL regulators help to protect the system with a built in low battery disconnect switch. In addition, the versatile event controller can switch power on or off according to criteria set by the user. This allows the PL to do extra tasks such as switching a light on at night or keeping a water tank full by operating a pump when needed.

The user can select either Pulse Width Modulation or slow speed switching. Regulation can be done in both series and shunt modes. Other features include backup generator control and charging a second battery.

*Shows daily charge & discharge amp hours on the LCD screen.
*Adjustable low or high battery voltage alarm
*Protected against reverse flow, lightning & short circuit. Low battery load disconnect built in.
 

The PR1210 is ideal for camping, boating and other one or two panel solar applications. It features brass inserts and screws in the terminal block and is fully enclosed in resin. The PR1210 is not adjustable.

* Reverse blocking diode
* mounting holes
* Two stage regulator
* Regulates charge from Solar Panels up to 10 amps
 

* Symmetrical charge and load currents, both 20A.
* 12, 24,3 2, 36 & 48V selectable.
* Reliable, easy to understand, one button interface and proven, easy to learn menu structure.

200 watt Solar Charger Maximum Power Point Tracker

* Increases solar panel output by up to 30%
* Autoselect for 12V and 24V panels and batteries
* Dawn to dusk, low voltage disconnect
* Additional surge and pv short protections
* Over temperature protection
* Optional monitor and control module

* Suitable for most types of heavy duty 12V battery.
* Microprocessor control PWM and 3 stage charging algorithms.
* Bulk, Absorption & Float Charge status on LCD Display.
* Ampere Hour logging read outs in 3 sets, today and last 2 days.
* 5 State LED Indications of battery levels.
* Electronic Overcharge Protection & Back Current Blocking to PV panel.
* Battery voltage: 12V
* Maximum PV panel open circuit voltage: 26V
* Continuous load / charge current: 20A

* Suitable for most types of heavy duty 12V battery.
* Microprocessor control PWM and 3 stage charging algorithms.
* Bulk, Absorption & Float Charge status on LCD Display.
* Ampere Hour logging read outs in 3 sets, today and last 2 days.
* 5 State LED Indications of battery levels.
* Electronic Overcharge Protection & Back Current Blocking to PV panel.
* Battery voltage: 12V
* Maximum PV panel open circuit voltage: 26V
* Continuous load / charge current: 30A

1800 watt Solar Charger Maximum Power Point Tracker

* Increases solar panel output by up to 30%
* Autoselect for 12V and 24V panels and batteries
* Over temperature protection

The PLS2 shunt adaptor is designed for use with PL series solar charge controllers. It allows the controller to measure charge or load currents which do not go though the controller. This allows inverter or generator currents to be included in the controller's display.

 

 The PLM remote monitor is a device which allows remote user access to a PL series charge controller. It shows exactly the same information as the PL screen, and the PLM button behaves in exactly the same way as the button on the PL.

 This means you can use the PLM for everything you would normally do at the PL itself, only in a more convenient or second location. You can access all the same information and adjust all the same settings as you can on the PL itself

Plasmatronics has a range of sheilded communication cables for the PL regulator series which help prevent electrical noise entering the regulator from nearby electronic equipment & cables.

Electrical noise in the communication cables could cause such problems as history corruption, incorrect voltage/current reading & phantom key pressures that could change the menu settings.

The WZ cable connects to the BAT-terminal of the PL regulator.

Plasmatronics PL60 & PL40 series regulator Wy cable

Plasmatronics WY cable is used to connect the PL20 or PL40 to the Plasmatronics external shunt adaptor.